Send Email
Facebook
Twitter
Linkedin
Youtube
UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment
Product Overview
UFc200BL capillary hollow fiber membrane yakakwira polymer zvinhu, izvo zvisingazove nekuchinja kwechikamu. Yakagadziridzwa PVC zvinhu, iyo inogamuchirwa pachigadzirwa ichi, ine yakanaka permeable mwero, yakanaka michina zvivakwa, yakanaka makemikari kuramba uye kusvibiswa kuramba. MWCO iri 100K Dalton, membrane ID/OD iri 1.0mm/1.8mm, mhando yekusefa iri mukati-kunze.
Applications
- Kugadzirwa kwemvura yemaminerari, mvura yemakomo emvura uye imwe mvura isina utachiona.
- Kunwa kurapwa kwepombi mvura, pamusoro pemvura, mvura yematsime, mvura yerwizi, nezvimwe.
- Pretreatment yeRO.
- Kurapa, kudzokorodza uye kushandiswazve kwemvura yakaraswa mumaindasitiri.
Filtration Performance
Ichi chigadzirwa chinoratidzwa kuti chine pazasi kusefa mhedzisiro zvinoenderana nemamiriro ebasa emvura dzakasiyana masosi:
| Ingredient | Mhedzisiro |
| SS, Zvimedu> 1μm | Removal Rate ≥ 99% |
| SDI | ≤ 3 |
| Utachiona, Utachiona | > 4 log |
| Turbidity | |
| TOC | Kubvisa Mwero: 0-25% |
* Pamusoro data inowanikwa pasi pemamiriro ekuti kudyisa mvura turbidity ndeye
Product Parameters
Technical Parameters:
| Rudzi rwekusefa | mukati-kunze |
| Membrane Material | Yakagadziriswa PVC |
| MWCO | 100K Dalton |
| Nzvimbo yeMembrane | 34m2 |
| Diaphragms ID/OD | 1.0mm/1.8mm |
| Dimensions | Φ200mm*1710mm |
| Connector size | DN50 Clamping |
Application Data:
| Mvura Yakachena Flux | 10,000L/H (0.15MPa, 25℃) |
| Yakagadzirwa Flux | 35-100L/m2.hr (0.15MPa, 25℃) |
| Suggested Working Pressure | ≤ 0.2MPa |
| Maximum Transmembrane Pressure | 0.2MPa |
| Maximum Working Temperature | 45℃ |
| PH Range | Kushanda: 4-10; Kugeza: 2-12 |
| Operating Mode | Cross-flow kana Dead-end |
Kudyisa Mvura Zvinodiwa:
Usati wadyisa mvura, sefa yekuchengetedza
| Turbidity | ≤ 15NTU |
| Mafuta & Girisi | ≤ 2mg/L |
| SS | ≤ 20mg/L |
| Total Iron | ≤ 1mg/L |
| Inopfuurira Residual Chlorine | ≤ 5ppm |
| COD | Zvinokurudzirwa ≤ 500mg/L |
*Zvinhu zveUF membrane ndeye polymer organic plastiki, hapafanirwe kuve nechero organic zvinonyungudutsa mumvura mbishi.
Operating Parameters:
| Maximum Backwashing Pressure | 0.2MPa |
| Backwashing Flow Rate | 100-150L/m2.hr |
| Backwashing Frequency | Imwe neimwe 30-60min. |
| Backwashing Duration | 30-60s |
| CEB Frequency | 0-4 nguva pazuva |
| CEB Nguva | 5-10min. |
| CIP Frequency | Yese 1-3 mwedzi |
| Washing Chemicals: | |
| Sterilization | 15ppm Sodium Hypochlorite |
| Organic Pollution Washing | 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide |
| Inorganic Pollution Washing | 1-2% Citric Acid / 0.2% Hydrochloric Acid |
Component Material:
| Chikamu | Material |
| Membrane | Yakagadziriswa PVC |
| Kuisa chisimbiso | Epoxy Resins |
| Housing | UPVC |