New Arrival China Membrane Design - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo
New Arrival China Membrane Design - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:
| No. | Item | Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤1 |
| 3 | CODcr | Removal?rate?depends?on?the?bio-chemicalperformance?& designed?sludge?concentration(Instant?removal?rate?of?membrane?is?≤30% without
bio-chemical?function) |
| 4 | NH3-H |
Specifications
Technical Parameters
| Structure | Outside-in |
| Membrane?Material | Reinforced Modified?PVDF |
| Pore?Size | 0.1 micron |
| Membrane?Area | 30m2 |
| Membrane?ID/OD | 1.0mm/2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint?Size | Φ24.5mm |
Application Parameters
| Designed?Flux | 10~25L/m2.h |
| Backwashing?Flux | Twice the designed flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | 8/9min?on+2/1min?pause |
| Aeration?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?2~4h;?CEB?every?2~4 weeks;CIP?every?6~12 months.???????????*Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof?differentialpressure. |
Using Conditions
Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not? ?easy to foul.
| Item | Value | Remark |
| PH | Operate: 5-9Wash: 2-12 | Neutral?PH is good?for?bacteria?culture |
| Particle?Diameter | <2mm | Sharp?particles?will?scratch?membrane |
| Oil & Grease | ≤2mg/L | High content will?affect?membrane?flux |
| Hardness | ≤150mg/L | High content will?cause?fouling |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified?PVDF |
| Sealing Compound | Epoxy Resins?+ Polyurethane?(PU) |
| Housing | ABS |
Product detail pictures:
Related Product Guide:
We stick with the theory of quality first, company first, steady improvement and innovation to satisfy the customers for the management and zero defect, zero complaints as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for New Arrival China Membrane Design - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Luxembourg , Dominica , Casablanca , We have been very responsible for all details on our customers order no matter on warranty quality, satisfied prices, quick delivery, on time communication, satisfied packing, easy payment terms, nice shipment terms, after sales service etc. We provide one-sgood service and very reliability to our every customers. We work hard with our customers, colleagues, workers to make a better future.
By Astrid
from Germany
- 2018.09.29 17:23
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Anna
from Mumbai
- 2017.03.08 14:45
Products categories
-
8 Year Exporter Ultrafiltration Mechanism - MC...
-
Manufacturing Companies for Microfiltration Mem...
-
Quality Inspection for Microfiltration System -...
-
Good Wholesale Vendors Hollow Fiber Membrane Wa...
-
Factory Cheap Hot Drinking Water Filter - UF M...
-
18 Years Factory Mbr System - UF Membrane Modu...