MCR Membrane Module Reinforced PVDF BM-SLMCR-20 RO Pretreatment

●?Unique gradient reticular?pore structure, high filtering precision and good output quality;

●?Unbreakable hollow fibers, 3-layer protective structure, hollow fibers are not easy to fall off, service life can reach 5 years +;

product details

Product Tags

Product?Overview

Submerged ultrafiltration (MCR) Technology is a water treatment technology which combines membrane technology and physico-chemical precipitation process. High-precision sludge-water separation of outlet from coagulation sedimentation tank can ?be? done? by? submerged? ultrafiltration? (MCR),? high? filtering? precision? of memrbane insures high quality and clear water outlet.

This product adopts reinforced modified PVDF material, which will not peel or break ?during? backwashing,? meanwhile? it? has? good? permeable? rate,? mechanical performance, chemical resistance and anti-fouling? ability. ID? & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtering precision is 0.03 micron.? Filtering? direction? is? outside-in,? that? is raw? water,? driven by? differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

● Purification of surface water;

● Reuse of heavy metal waste water;

● Pretreatment of RO.

Filtration?Performance

Below? filtration? effects? are? proved? according? to? the? use? of modified ?PVDF hollow fiber ultrafiltration membrane in different types of water:

No.	Item	outlet water index
1	TSS	≤1mg/L
2	Turbidity	≤ 1

Specifications

Size

Chart 1 MBR Size

Technical?Parameters:

Filtering Direction	Outside-in
Membrane Material	Reinforced Modified PVDF
Precision	0.03? micron
Membrane Area	20m²
Membrane ID/OD	1.0mm/ 2.2mm
Size	785mm×1510mm×40mm
Joint Size	DN32

Component?Material:

Component	Material
Membrane	Reinforced Modified PVDF
Sealing	Epoxy Resins + Polyurethane (PU)
Housing	ABS

Using?Conditions

Proper?? pretreatments ??must?? be?? set?? when?? raw?? water?? contains?? a?? lot?? of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove ?foams? in membrane tank when necessary, please use? alcoholic? defoamer which is not easy to scale.

Item	Limit	Remark
PH Range	5-9 (2- 12 when washing)	Neutral PH is better for bacterial culture
Particle Diameter	<2mm	Prevent sharp particles to scratch membrane
Oil & Grease	≤2mg/L	Prevent membrane fouling/sharp flux decrease
Hardness	≤150mg/L	Prevent membrane scaling

Application?Parameters:

Designed Flux	15~40L/m².hr
Backwashing Flux	Twice the designed flux
Operating Temperature	5~45°C
Maximum Operating Pressure	-50KPa
Suggested Operating Pressure	≤-35KPa
Maximum backwashing Pressure	100KPa
Operating Mode	Continuous opeartion, intermittent backwashing air flushing
Blowing Mode	Continuous Aeration
Aeration Rate	4m³/h.piece
Washing Period	Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months(Above information is for reference only, please adjustaccording to actual differential pressure change rule)