High definition Membrane Bioreactor Process - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Waste Water Filter System , Water Filter Water Purifier , Membrane Filtration Technology , Welcome you to join us together to make your business easier. We are always your excellent partner when you want to have your own business.

High definition Membrane Bioreactor Process - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo Detail:

Applications

● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:

No.	Item	Water?Output?Index
1	TSS	≤1mg/L
2	Turbidity	≤ 1

Specifications

Size

product-description1

Chart 1 MBR Size

Technical Parameters

Filtering?Direction	Outside-in
Membrane?Material	Reinforced?Modified?PVDF
Precision	0.03 ?micron
Membrane?Area	25m2
Membrane?ID/OD	1.0mm/ 2.2mm
Size	785mm×2000mm×40mm
Joint?Size	DN32

Component Material

Component	Material
Hollow?Fiber?Membrane	Reinforced?Modified?PVDF
Sealing Compound	Epoxy?Resins?+?Polyurethane (PU)
Housing	ABS

Using Conditions

Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.

Item	Limit	Remark
PH?Range	5-9 (2- 12 when?washing)	Neutral?PH?is?better?for?bacterial?culture
Particle?Diameter	<2mm	Prevent?sharp?particles?to?scratch?membrane
Oil?&?Grease	≤2mg/L	Prevent?membrane?fouling/sharp?flux?decrease
Hardness	≤150mg/L	Prevent?membrane?scaling

Application Parameters

Designed?Flux	15~40L/m2.h
Backwashing?Flux	Twice?the?designed?flux
Operating?Temperature	5~45°C
Maximum?Operating?Pressure	-50KPa
Suggested?Operating?Pressure	≤-35KPa
Maximum?backwashing?Pressure	100KPa
Operating?Mode	Continuous?opeartion, intermittent?backwashing?air?flushing
Blowing?Mode	Continuous?Aeration
Aeration?Rate	4m3/h.piece
Washing?Period	Clean?water?backwashing?every?1~2h; CEB?every?1~2 days;Offline?washing?every?6~12 months (Above?information?is?for?reference?only, please?adjust according?to?actual?differential?pressure?change?rule)

Product detail pictures:

Related Product Guide:

continue on to further improve, to make sure product high quality in line with market and consumer standard requirements. Our firm has a excellent assurance program have already been established for High definition Membrane Bioreactor Process - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo , The product will supply to all over the world, such as: Algeria , Nigeria , Jersey , All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.

Cross Flow Ultrafiltration

Membrane Bioreactor Process

Membrane Design

Uf Membrane Water Filter

Ultrafiltration Filter

Ultrafiltration Membrane Material

Ultrafiltration Systems Water Treatment

Water Filter For Drinking Water

Water Filtration Membrane

Water Purification Membrane

The customer service staff's answer is very meticulous, important is that the product quality is very good, and packaged carefully, shipped quickly!
5 Stars